![]() Do not mix Alkaline, Lithium, standard, or rechargeable batteries.La Crosse Clock Company, Warranty Department, 2830 South 26th Street., La Crosse, WI 54601 CARE + MAINTENANCE If a defect that is covered by this warranty arises during the warranty period, promptly return the clock (postage prepaid) with proof of purchase showing the date the weather station was purchased to the following address and such defects will be repaired, or the products will be replaced at La Crosse Clock Company option without charge. Warranty will not apply to defects resulting from abuse, accidents, or misuse. This product is warranted to be free from defects in material and workmanship under normal use and service for a period of one year from the date of sale to the customer. Ask questions, watch detailed setup videos, and provide feedback on our social media outlets!.Our knowledgeable customer support team is available:.If you require additional support, get in touch with our friendly customer support team based out of La Crosse, WI.Power Requirements: 2 “AAA” LR3 Batteries (not included).Transmission Range: Over 197 feet (60 meters) in open air RF 433MHz Update Interval: About every 50 seconds.Battery Life: Over 12 months with reputable batteries.Optional: 2 “AAA” LR3 Batteries (not included).Power Requirements: 5V/1A USB Power Cord*.Press the button to start or stop the auto-scroll. The Auto-scroll Icon shows when the station cycles through all three channels.The Channel Number on the station should match the Channel selected on the sensor.The Channel Indicator will highlight which sensor data is being displayed. This station can show data for up to 3 remote sensors.When the Battery Indicator shows next to the indoor temperature, replace batteries in the Weather Station.When the Battery Indicator shows next to the outdoor temperature, replace batteries in the Outdoor Sensor.Use a paper clip to press the RESET button on the back of the station. If your outdoor sensor is unable to reconnect on its own, a reset of your station may be necessary.When the sensor is connected, the Reception Icon will flash once when new signal is received.To search for your Outdoor Sensor, hold the button until the Reception Icon animates.If the sensor loses connection to the station for any reason, the station will show dashes after 3 minutes.Hold the MIN/MAX button to reset all Indoor and Outdoor records to current readings.Press the MIN/MAX button to view records.Press MIN/MAX again to view MIN records.Press the MIN/MAX button to view indoor & outdoor MAX records.When the alarm sounds, press any button to silence the alarm for 24- hours.Press the ALARM ON/OFF button to activate or deactivate the alarm.Setting the alarm time and activating the alarm are separate actions. Use the + or – button to adjust, and SET/ALARM to confirm and exit.With the word “ALARM” showing in the upper right corner, hold the SET/ALARM button to enter Alarm Settings. ![]() Press the SET/ALARM button so the word “ALARM” shows in the upper right corner.Press the button to select Fahrenheit or Celsius temperature display. Weekday: Weekday sets automatically when Year, Month and Date are set. Language: The language selected in this menu will adjust the Weekday readout and menu items. Once the settings begin flashing, let go of the SET/ALARM button and use the + or – button to adjust, and SET/ALARM to confirm or exit. ![]() With the word “TIME” showing in the upper right corner, hold the SET/ALARM button to enter the main Settings Menu. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |